Produsent: FMS

FMS 1300mm PA-18 Super Cub Reflex Gyro V2 PNP

Spesifikasjon:

Wingspan: 1300 mm
Overall Length: 986 mm
Flying Weight: Around 1450 gram
Propeller:11 x 7,2"
Motor Size: Brushless 3536-KV 850
ESC: 40 Amp
Servo: 9g Servo x 6 stk
Flaps: Ja
Navigasjonslys: Ja
Gyro: not included
Radio: min 6 Channel - not ncluded
Recommended Battery: Li-Po 3S 11,1V 2200 - 2600 mAh - not included
Charger: 3 S LiPo - not icluded

Veil. 3.490,- Ikke medlem: 2.895,-
2.895,-
  • Betal med faktura
  • Betal med kort
  • Delbetaling
  • Vipps
På lager På lager

SKU: FMS-1300mm-pa-18-super-cub-reflex-gyro-v2-pnp

FMS her med en 1300mm versjon av den populære PA-18 Super Cub som her leveres med et STOL-understell som består av supermyke 120mm hjul. Med fungerende flaps og solid understell får man skikkelige STOL-egenskaper (short take-off and landing). Modellen leveres som PNP hvor man i tillegg trenger radio, mottaker, batteri (XT60) og lader. Ellers er alt av elektronikk som børsteløs motor, ESC, og servoer montert. Monteringstid er estimert til rundt 10 minutter. OBS! Vi legger også ved et modifiseringssett med festeskruer og klemmuttere for sikker innfesting mellom rorhorn og ballinkene, da denne innfestingen fra fabrikken kan løsne under bruk. Vi garanterer at vår løsning holder alle typer belastning. Se bilde av dette. 
Med materiale av EPO oppnår man en solid konstruksjon som tåler mye, samtidig som det er veldig lett. Med modellens lette vekt og kraftig motoroppsett ved bruk av 3 LiPo oppnår man en flytid på rundt 5-7 minutter avhengig av flystil. Flyet kan ta av på under 3 meter eller ca. 3 flylengder. LED-lys sørger for en skikkelig skalafølelse.

Reflex:
Med Reflex-systemet til FMS får man tre flymoduser, stabilisert, optimalisert og av. Valg av modus avhenger av dine ferdigheter, som gjør flyet perfekt til både nybegynneren og eksperten. Systemet gjenkjenner også automatisk signaltypen fra din mottaker, byttende mellom SBUS, PPM og PWM.
alt
 

1. Powerful 3536-850KV motor with 40A ESC provides adequate thrust for any situation.
2. CNC metal landing gear structure for less-than-perfect landings.
3. Oversized pneumatic rubber tires for all-terrain operations.
4. STOL capable (Takes off in less than 3m/10ft)
5. Preinstalled navigation lights
6. Two-section fuselage
7. Two-piece wing and horizontal stabilizer for easy transportation
8. High-strength carbon fiber wing spars
9. Screw-together assembly
10. Large battery bay
11. Preinstalled ball-linked pushrods for increased precision
12. Tough two-blade nylon propellers
13. Functional flaps
14. Optional floats

 

Opis:

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing. The FMS 1700mm PA-18 was launched in 2019, and its stable, easy-to-fly and easy-to-operate features have brought full surprises to both new and old pilots. While this trainer has been widely praised, FMS has been constantly asked whether it is possible to reduce the size of the aircraft, including the aircraft itself and the packaging, while maintaining its stability and operating controllability as much as possible, so that it can be picked up like a boarding suitcase. With the 1300mm PA-18, FMS has answered the above question. The 1300mm PA-18 also adopts a two-section main wing and horizontal stability structure, but at the same time, the fuselage is also two-section, which greatly facilitates players' transportation and carrying. It can be hidden in the corner of a car trunk, ready to be used at any time. Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized pneumatic rubber tires- the 1300mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain. In addition, the assembly steps of the 1300mm PA-18 are still simple and convenient, and the assembly and disassembly of the entire aircraft can be completed with just a few screws. For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats. The latest 1300mm PA-18 could be a great start to enjoying versatile, fun and exceptionally relaxing flight.

CNC Metal Landing Gear

Landing gear are made of CNC metal is robust and look quality, and designed for less-than-perfect landings. Steady & durable structure is more friendly for beginner's flying.

alt

Less Than 3m STOL Capabilities

Easy-to-fly and easy-to-operate features have brought full surprises to both new and old pilots, it can take off in less than 3 meters.

alt

Oversized Pneumatic Rubber Tires

Rubber tires features oversize of 120mm and pneumatic, allowing it to operate from just about any terrain. The quality of the details create the overall valuve of our rc airplanes.

alt

Easy To Assemble & Carry

Thanks to the structure of two-section fuselage and two-piece wing, it is greatly facilitates players' assemble and carrying. Also can be hidden in the corner of a car trunk, ready to be used at any time.

alt
alt
alt
alt
alt
alt
alt
alt
alt
alt
alt
alt
alt
alt
Minicart 0
Handlevogn
0.00 NOK