-33%

Produsent: RADIOLINK

Radiolink AT9S Pro 2.4GHz 10/12CH TX with DSSS&FHSS RX

Specifications:

Size: AT9S Pro 183*100*193mm, R12DS- 41*23*14mm
Weight: 0.88kg
Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz)
Modulation mode: QPSK
Channel bandwidth: 5.0 MHz
Spread spectrum: DSSS&FHSS/CRSF
Adjacent channel rejection: >38dbm
Transmitter power: <100mW (20dbm ) CRSF 10mW/25mW/100mW/500mW/1W/2W (Optional)
Operating current: DSSS&FHSS <90mA@12V CRSF Depends on transmission power selected
Operating voltage: 7.4~18.0V
Control range: Maximum range in air DSSS&FHSS - 4000 meter. The actual control distance depends on the flying environment.
Control range: CRSF Depends on the RX and TX from BLACKSHEEP

Channel qty: 10 -12 channels
Signal output: PWM/SBUS/PPM/CRSF

Compatible model: include all 120 degree and 90 degree swash-plate helicopter, all
fix wings, glider and multi-rotor
Simulator model: under the simulator model the transmitter action turn off, change to power saving model
Screen: 2.8 inches 16 colorful screen, 240*320 pixels
Support receivers: R12DSM, R12DS, R10DS, R9DS, R6DSM and R6DS
CRSF Protocol: Receiver from BLACKSHEEP

Veil. 2.390,- Ikke medlem: 1.590,-
1.590,-
  • Betal med faktura
  • Betal med kort
  • Delbetaling
  • Vipps
På lager På lager

SKU: RLAT9SPro

  • Produktinformasjon
  • Video

Dette er den nyeste versjonen av den allerede så populære AT9 radioen. AT9S Pro. Omtales som en av de mest brukervennlige, velutstyrte og beste radioene på markedet nesten uansett pris. Radiolink sine radioer er mye mer stabile, presise og med mye hurtigere oppdatering av signalet enn open source radioene som tilbys på markedet nå. Denne radioen dekker alle mulige behov man måtte ha bruk for. Likevel er den meget enkel både å bruke og programmere. Meget brukervennlig, lynrask responstid, kvalitetssikret og rimelig radio. Kommer med nakkestropp og 9 kanals mottaker med tilkobling for S-Bus og Telemetri. Den støtter også bruk av TBS Crossfire CRSF Protocol.

Veldig nyttig! Se full detaljert gjennomgang av radioen her: KLIKK HER

Passende ladbart LiPo batteri til denne radioen: KLIKK HER


En ny helt fantastisk velutstyrt kvalitetsradio med ny oppgradert software til en utrolig lav pris. Markedets raskeste radio. Kun 3 millisekund responstid! Den er dobbel så rask som Futaba 9ch til flere ganger prisen og over seks ganger så rask som andre sammenlignbare radioer. Senderen har et unikt strømspareprogram som reduserer strømforbruket til nesten en tredjedel av normalt. Rekkevidden er på opp til 4 km og den er også klargjort for Telemetri. Har programmer som takler alle mulige oppgaver og behov. Mer er det ikke å si om det. Sjekk den utrolige innholdslisten nedenfor. Radioen har både trainer switch og trainerkontakt for å kobles sammen med alle andre typer Radiolink sendere via trainer kabel og kan da fungere som både instruktørradio og elevradio. Senderen passer til alle Radiolink DS mottakere.

Denne radioen kan nå oppgraderes til 12 kanaler. Last ned 12 kanals software: KLIKK HER

Radiolink 2019 AT9S Pro Version TX 10/12CH RC Transmitter Radio Controller Support TBS Crossfire CRSF Protocols for Racing Drone, Quadcopter, Fixed Wing, Helicopter, Car Vehicles and more (Mode 1/2)

 

AT9S PRO Features:

 
-Radiolink 2019 AT9S Pro Version TX 10/12CH RC Radio Controller Support T8S Crossfire CRSF Protocols with R12DSM Mini Receiver RX 2.4G for Racing Drone Quadcopter Mode 1/2.
-Excellent Anti-interference: The rc transmitter with DSSS&FHSS working synchronously to keep the excellent anti-interference performance, only 3ms for10 channels response.
-CRSF Protocol Supported: On the basis of the RadioLink unique communication technology of DSSS and FHSS, CRSF protocol from BLACKSHEEP is added. Compatible with TBS Crossfire TX.
-Compatible with SBUS, PPM, PWM and CRSF: With DSSS&FHSS protocol, SBUS, PPM and PWM can operate simultaneously for seamless user control. With CRSF protocol, TBS Crossfire TX is needed to bind to BLACKSHEEP receiver.
-Real-time Information: When with flight module PRM-03,model voltage, speed, climb, throttle, longitude, latitude, altitude, GPS, RSSI, flight mode, yaw, roll, Pitch and distance are displayed. on the LCD screen display.
-Adapts to All Types of Aircraft: Easy to understand user software makes quick work of changing aircraft types,  Rotary Wing, Fixed Wing, Multicopter, Car, Boat, Robot. Transmitter automatically switches layout depending on selected mode.
-USB Based Upgrades: Transmitter is easily updated with the latest firmware by USB cable to connect PC.
-Voltage Protection System: RadioLink’s voltage protection software ensures vital components are protected from a reverse polarity connection.
-Simple Setting Humanized: Menu is designed applicable to both beginners and skilled person, only need takes 1 second to bind.
-Support for Universal Battery: JST connector supports multiple type batteries: 8 pcs AA or 2s-4s LiPo battery. (Not included batteries) A 3s 1800mAh liPo battery can work more than 12 hours.

R9DS Receiver Specifications:

Signal: SBUS,PWM

Channel: PWM 9 channels, SBUS 10 channels

Control Distance: 900m on ground,1500m air

Working Voltage: 4.8-10V

Working Current: 38-45mA(input voltage: 5V)

Size: 43*24*15mm

Weight: 11g
 

Package Included:

 

AT9S Pro 1/2 Mode  x 1

R9DS Receiver x 1

Radiolink Lanyard x 1

Mode 1/2 Changing Parts x 1

Simple User Manual x 1 
Color: Champagne

AT9S Pro Over View

 

AT9S/AT9S Pro FAQ:
 
Q1: How to upgrade AT9S Pro firmware?
A: Please click below link to check the tutorial video
 
Q2: Will the parameters of different model types set before be cleared or modified once the firmware flashed/upgraded?
A: No. The firmware upgrade won't change any personalized parameters already set.
 
Q3: Can AT9S Pro Mode be changed?
A: Yes, exchange the positions of the Lever Arm Spring and the Tension Plate. Then enter the BASIC MENU to the corresponding Mode Number. Or ask help from after sales service
 
Q4: What are the compatible receivers to AT9S?
A: Compatible receivers: R6DSM, R6DS, R9DS, R12DSM, R12DSM
Make sure your AT9S Pro is 12CH when works with R12DS, R12DSM.
Make sure your AT9S Pro is 10CH when works with R6DSM, R6DS, R9DS.
BASIC MENU -> SYSTEM -> Select the CH-SELECT and change the Number as required.
 
Q5: How to calibrate AT9S Pro joysticks?
A: Press END key and PUSH key at the same time, then turn on the power switch to enter the interface of joystick calibration and follow the steps shown on the screen. Click below link to check the tutorial video. https://youtu.be/84lEYy-d_Uo