Produsent: MODELL HOBBY

CT-6A 2.4G 6CH FHSS pistolstyring for bil, båt,tank

Spesifikasjoner:
Model type : CT-6A pistolgrepradio
Weight: 230 gram
Model Type: Car/Boat/Tank
Channels: 6 Channel
RF Range: 2.4Ghz ISM(2.4005-2.483.5GHz)
RF power: <100mW
Modulation: GFSK
Spread spectrum: FHSS
Reaction speed: PWM:≤20ms
RF Distance: Ground 400-500 meter
Receive sensitivity: <-97dbm
Transmitter voltage: DC 4 - 9 volt
Receiver voltage: DC 4 - 9 volt

Certificate :CE0678 FCCID

Veil. 1.490,- Ikke medlem: 990,-
990,-
  • Betal med faktura
  • Betal med kort
  • Delbetaling
  • Vipps
På lager På lager

SKU: CT-6A+rec

  • Produktinformasjon
  • Video
  • User guide english

Meget bra, rimelig og flott anatomisk utformet radio. Ligger ekstremt godt i hånden og er enkel å betjene. Stabiliseringsgyroen kan slåes av eller på. Styrehjulet er ekstremt presist og er kulelagret! Radioen er også utstyrt med telemetri. Radioen er meget enkel å bruke og krever ingen programmering. Alt man normalt trenger, både på små og store modeller, er oversiktlig plassert i fronten.  

Features:
 

Creative

Integrated design One-handed Control 6 CH

Can be set to runaway protection, 1-2CH can be set to mix control mode, fine-tuning button can be set to lock 2.4G spread frequency, stable signal.

Only use FHSS frequency hopping algorithm, multiple people can operate in the same place at the same time without interference, and the ground remote control distance is stable 400 meters

Fine craftsmanship

Standard sponge wheel, exquisite electroplating of the hand wheel, high-grade PVC panel, every detail is finely processed

Ergonomics

Comfortable silicone strips on both sides, exquisite leather pattern design, comfortable hand feel, not easy to sweat

Large battery compartment

Innovative detachable battery box, can be directly inserted into the 2S lithium battery balance port, convenient and practical

Binding og bruk: Se norsk brukerveiledning.

After the calibration is completed, the flight control status indicator (FC) is on, and the calibration is completed.
④: Use process: In the later use process, no operation is required to replace the battery and reuse it;
When changing the position of the receiver, you need to follow the calibration procedure again and recalibrate.
⑤: 5 channels (SWA) hit the top: flight control-manual mode.
5 channels (SWA) hit the bottom: flight control-self-stabilization mode
⑥: ° Flight control receiver with mixed control mode, you need to turn the mixed control switch to the middle position.
RF: remote control status indicator
The light will appear in three states, always on: the signal is good:
Regular flashing: indicates no signal;
Irregular flashing: the signal is weak.
FC: Flight control status indicator
The lamp will appear in two states: steady light: calibration completed;
Blinking: calibrating.

Pakcage Included:
1x Controller
1x Receiver
1x Bind plug
1x Quick start guide